Waterproofing

Solvent used for cleaning tools and diluting epoxy and polyurethane coatings. Dilution for products such as Ktisepox, Ktisepox Piscine & Anydron 2K can reach 5-10% of the final product.

Read more less

Description A product designed to give you peace of mind once and for all from the problems of rain . If applied properly, the product will give you peace of mind for at least 10+ years. It is a long-lasting, brushable roof sealant with the following characteristics: Resistance to standing water Frost resistance down to -30 degrees Excellent elasticity over 300% Consumption: 1 kg/ sq.m for two coats Lifespan: 10+ years Can be applied to slabs, cement, mosaic, old insulation, etc. Recommended Primer: Ktisepox Hydro PR The product is polyurethane-based, produced in Greece with German raw materials. The material is two-component and the two components must be mixed with an electric mixer before application. Dilution with solvent by 5-10% is also recommended If you want a more economical solution (that offers fewer years of protection) then we recommend you get Ktisotop To see the differences between acrylic and polyurethane materials , click here Application Instructions ANYDRON 2K is used for the waterproofing of terraces and roofs. It can be used on a range of surfaces such as concrete, cement mortar, polyurethane foam, bridges, planters, etc. SURFACE PREPARATION Thorough surface preparation is essential to ensure good adhesion. The surface must be dry and free of dust, loose materials, mold. Oils and chemicals should be cleaned with a special detergent. If you have washed the surface, make sure it is thoroughly dry before application. If applying on fresh concrete, make sure that 28 days have passed before application. It is recommended to prime the surface in order to ensure better adhesion. Epoxy primerKTISEPOX HYDRO PR is recommended. After applying the primer, wait one day before applying ANYDRON 2K. Applying ANYDRON 2K The contents of container B must be emptied into container A. The material must be mixed with a stirrer and must last for at least 2-3 minutes at 300 rpm. “Rough” mixing is often the reason why the material does not harden properly, and remains soft and sticky after application. It is recommended to dilute the material with polyurethane solvent up to 5-10%. The product can be applied either by brush or roller in two coats . The estimated consumption is 500-600 gr/m2 per coat depending on the absorbency of the surface. The second coat can be applied after 24 hours. Allow a total of 3 consecutive days to complete the application. If it rains in the meantime, you can continue after the surface has dried. Performance Indicative quantity for a 100 sq m terrace: 4 containers of Anydron 2K of 25kg X €105 = €420 1 solvent €25 (optional) 2Ktisepox Hydro PR primers X €65 = €130 The above calculation is valid for 2 hands

Read more less

Description An economical solution to protect your terrace effectively without going over budget! Acrylic-based Roof Insulation suitable for waterproofing roofs and exterior walls Creates a rubber-like waterproof surface Easily applied with a roller or brush Available in White and Brick color Diluted with water up to 10% Elasticity over 300% Recommended Primer: Ktisoplast diluted with water 1:1 Lifespan: 3-4 years Yield 1 kg per sq m for two coats If you want a longer-lasting solution for your terrace then we recommend you check out our product Anydron 2K . To see the differences between acrylic and polyurethane materials , click here Application Instructions TECHNICAL INFORMATION KTISOTOP is used for the waterproofing of terraces and roofs . It can be used on a range of surfaces such as concrete, cement mortar, masonry. SURFACE PREPARATION Thorough surface preparation is essential to ensure good adhesion. The surface must be dry and free of dust, loose material, mold. If you have washed the surface, make sure it is thoroughly dry before application. It is recommended to prime the surface in order to ensure better adhesion. As a primer you can use KTISOPLAST diluted with water (in a ratio of 1:2). The primer dries within 2-3 hours and then KTISOTOP can be applied. Filling cracks and joints can be done with acrylic mastic and allowed to dry for at least two hours. Applying KTISOTOP The product can be applied either by brush or roller . It is recommended to apply at least two coats . The estimated consumption is 500-600 gr/m2 per coat depending on the absorbency of the surface. The second coat can be applied after 24 hours. Depending on the application, it is possible to dilute the material with water up to 10% of the original weight. Performance It is recommended to apply the material in two coats where the total consumption reaches 1kg/m2. Example for a 100 sq m terrace - One coat of Ktisoplast primer 12kg €30 - 7 X 15 buckets of Ktisotop 15kg € 350 Total €380

Read more less