Floor Coatings

Two-component Epoxy Paint suitable for floor covering. Suitable for storage areas, crafts, car workshops, parking lots, areas of health interest Applied with one coat of primer & 2-3 coats of Ktisepox It can be applied to a range of surfaces such as industrial concrete floors, cement screeds, mosaic, tiles, old epoxy surfaces . Application to wood is not recommended. Creates a waterproof surface that does not absorb liquids and oils Does not allow dust to build up on the floor Resistant to pallet truck, cargo and vehicle traffic Quartz sand can be added (in combination with more hands) for greater abrasion resistance Pot working time: 35-45 minutes Recoating Time: 24 hours. The space can be used after 24-48 hours. Final strength is achieved after 7 days. For indoor use only. For outdoor use, Ktisopur UV is recommended, which is resistant to sunlight. Application Instructions Meticulous surface preparation is required to ensure the best possible adhesion. The substrate must be sanded by mechanical means such as a diamond grinder, mosaic machine, etc. The surface must be dry, clean and free of loose materials before priming. If there are oils or other chemicals, they must be removed by additional sanding or by using a special cleaner. When applying to fresh concrete, ensure that the concrete is at least 28 days old before priming and coating with KTISEPOX. PRIMER The surface should be primed with KTISEPOX HYDRO PR before applying KTISEPOX. If rapid absorption of the primer is observed, it is recommended to repeat the process in the specific areas. The KTISEPOX epoxy paint can be applied once the primer has dried. The drying time of the primer depends on the environmental conditions as well as the substrate (3-12 hours). Crack and joint filling Cracks and holes should be repaired with KTISODUR G epoxy putty and allowed to dry for at least 12 hours. Before applying KTISEPOX, the putty surface should be sanded and cleaned. Preparation KTISEPOX Empty the contents of container B into container A and mix with an electric mixer. The material should be mixed with a stirrer and should last for at least 1-2 minutes at 300 rpm. “Rough” mixing is often the reason why the material does not harden properly and remains soft after application. Applying KTISEPOX The application of epoxy paint is done either by roller, squeegee or airless gun. The expected consumption is 250 gr/m2 per layer for roller, and 500 gr/m2 with airless. The second layer can be applied 18-24 hours after the first layer. It is always recommended to apply at least two coats of the material. A thinner may be added to make the application of the material easier. The addition of thinner should not exceed 10% (by weight) otherwise there is a risk of discoloration and a reduction in the strength of the floor. Performance - Material Consumption The consumption per hand is approximately 250gr/m2 which means that 1 kilo of Ktisepox yields approximately 4 sq.m. The 15 kg package yields up to 60 sq.m (for one hand) It is recommended to add a 5% solvent to achieve this consumption. Example for Area 300 m2 - 3x10 kg Ktisepox Hydro PR primer - 10x15kg Ktisepox epoxy paint (for 2 coats) - 2 x 5l solvent

Read more less

Two-component water-soluble epoxy floor primer with strong adhesion capabilities. KTISEPOX HYDRO PR can be applied to a range of surfaces such as industrial floors, cement screeds, terraces, mosaic, old epoxy surfaces. The product is applied to surfaces that are to be covered with either epoxy or polyurethane coatings. This particular epoxy floor primer can also be applied as a barrier for surfaces with light moisture. Consumption 100-120 gr/m2

Read more less

Self-leveling Epoxy resin flooring system (two-component) that protects surfaces from heavy loads and chemical corrosion. Ktisofloor creates a single smooth surface without joints with excellent durability. - Common areas of application : Food and beverage industries, Pharmaceutical production and storage, Storage and logistics areas, Parking lots, Commercial areas. - The product must be applied by a properly trained and qualified crew with experience in the installation of industrial floors. - It is possible to add quartz sand M32 (granularity 0.1-0.3 mm) to the KTISOFLOOR mixture in a ratio not exceeding 2:1 (by weight). - The material is spread with a notched trowel and a needle roller is used to level and release the trapped air. It is very important to release the air, otherwise there is a risk that bubbles will appear after the floor dries. - Personnel who will be responsible for leveling and rolling the material must wear studded shoes in order to have access to areas where the material is still wet. - The material is spread at a thickness of 2-3 mm . It is not suitable for leveling raw concrete. Consumption : for a 2mm floor, the 15kg package covers approximately 7 sq.m.

Read more less

Two-component epoxy putty used for cement repair, filling cracks and voids. KTISODUR G is a thick, easy-to-apply paste suitable for horizontal and vertical surfaces. The product is often used as a putty for industrial floors and swimming pools before coating with epoxy coatings such as KTISEPOX and KTISOFLOOR products. Available in 5kg, 1kg packages Available in 3:1 volume ratios for easy application during work hours.

Read more less

Two-component solvent-based epoxy resin (honey) that can be used for projects such as: - Epoxy Primer for floor surfaces that are to be painted with epoxy coatings - In combination with quartz sand, it can be applied as a troweling filling layer on surfaces with many holes - Construction of quartz floors where resin is used to 'bond' the quartz and ensure good adhesion to the floor - Available in a 2:1 ratio - Available in 4kg, 10kg packages - Pot working time: 30 minutes Performance - Material Consumption When applied as a floor primer, the estimated consumption is 150-200 gr/m2. It can be diluted with solvent up to 15%. When used for quartz floors, it is applied at a rate of 10-20% of the total mixture.

Read more less

KTISOPUR UV is a two-component floor paint based on aliphatic polyurethane used for exterior uses. It is recommended as an alternative to epoxy paint when the paint will be exposed to sunlight. - Indicative applications: Balconies, Terraces, Grandstands, Beach bar, etc. - It can also be used as a protective layer on surfaces coated with ANYDRON 2K. The product is resistant to mechanical stress and allows pedestrian and vehicle traffic. - The product does not exhibit chalking phenomena since it has excellent resistance to UV radiation. - Yield : 1kg yields 3-4 sq.m (one coat). The 5kg package covers up to 20 sq.m for one coat. - Priming with Ktisepox Hydro PR is recommended - Available in Grey (RAL 7040) & White

Read more less

RAPID RESIN is a two-component, fast-setting epoxy resin used for joint repairs and damage to industrial floors. After hardening, the material has excellent strength and adhesive properties, which allows for long-term protection against new damage. Its main features are: - Workability time 20 minutes - Hardening Time 4-6 hours - Mixed with Quartz Sand for added volume and strength - Suitable for filling worn joints, holes, and small potholes that form on the floor Material Ratio A: 2.4 kg, B: 1.6 kg - (Add as much quartz sand as you need to achieve the desired thixotropy)

Read more less

Solvent used for cleaning tools and diluting epoxy and polyurethane coatings. Dilution for products such as Ktisepox, Ktisepox Piscine & Anydron 2K can reach 5-10% of the final product.

Read more less